dmesg - Intel Core i7-8550U
microcode: microcode updated early to revision 0x80, date = 2018-01-04
Linux version 4.14.14-1-default (geeko@buildhost) (gcc version 7.2.1 20180116 [gcc-7-branch revision 256737] (SUSE Linux)) #1 SMP PREEMPT Wed Jan 17 09:26:10 UTC 2018 (eef6178)
FEATURE SPEC_CTRL Present
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000002dc79fff] usable
BIOS-e820: [mem 0x000000002dc7a000-0x000000002dc7afff] ACPI NVS
BIOS-e820: [mem 0x000000002dc7b000-0x000000003f0b2fff] reserved
BIOS-e820: [mem 0x000000003f0b3000-0x000000003f0fffff] ACPI data
BIOS-e820: [mem 0x000000003f100000-0x000000003f7b7fff] ACPI NVS
BIOS-e820: [mem 0x000000003f7b8000-0x0000000047ffffff] reserved
BIOS-e820: [mem 0x0000000048000000-0x0000000048dfffff] usable
BIOS-e820: [mem 0x0000000048e00000-0x000000004f7fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000004ae7fffff] usable
NX (Execute Disable) protection: active
random: fast init done
SMBIOS 3.0.0 present.
DMI: Dell Inc. XPS 13 9370/0F6P3V, BIOS 1.0.2 12/06/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x4ae800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask 7F80000000 uncachable
1 base 0060000000 mask 7FE0000000 uncachable
2 base 0050000000 mask 7FF0000000 uncachable
3 base 004C000000 mask 7FFC000000 uncachable
4 base 004B000000 mask 7FFF000000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: last_pfn = 0x48e00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcfc0-0x000fcfcf] mapped at [ffffffffff200fc0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff8dff80097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x1ce7e6000, 0x1ce7e6fff] PGTABLE
BRK [0x1ce7e7000, 0x1ce7e7fff] PGTABLE
BRK [0x1ce7e8000, 0x1ce7e8fff] PGTABLE
BRK [0x1ce7e9000, 0x1ce7e9fff] PGTABLE
BRK [0x1ce7ea000, 0x1ce7eafff] PGTABLE
BRK [0x1ce7eb000, 0x1ce7ebfff] PGTABLE
BRK [0x1ce7ec000, 0x1ce7ecfff] PGTABLE
BRK [0x1ce7ed000, 0x1ce7edfff] PGTABLE
RAMDISK: [mem 0x2b4fa000-0x2c1e8fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000E8E70 000024 (v02 DELL )
ACPI: XSDT 0x000000003F0C30B8 0000EC (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FACP 0x000000003F0E9728 00010C (v05 DELL CBX3 01072009 AMI 00010013)
ACPI: DSDT 0x000000003F0C3230 0264F1 (v02 DELL CBX3 01072009 INTL 20160422)
ACPI: FACS 0x000000003F7B5180 000040
ACPI: APIC 0x000000003F0E9838 0000BC (v03 DELL CBX3 01072009 AMI 00010013)
ACPI: FPDT 0x000000003F0E98F8 000044 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FIDT 0x000000003F0E9940 0000AC (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: MCFG 0x000000003F0E99F0 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
ACPI: HPET 0x000000003F0E9A30 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
ACPI: SSDT 0x000000003F0E9A68 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: BOOT 0x000000003F0E9DC8 000028 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: SSDT 0x000000003F0E9DF0 0012DE (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: HPET 0x000000003F0EB0D0 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F)
ACPI: SSDT 0x000000003F0EB108 000CEF (v02 INTEL xh_rvp07 00000000 INTL 20160422)
ACPI: UEFI 0x000000003F0EBDF8 000042 (v01 00000000 00000000)
ACPI: SSDT 0x000000003F0EBE40 0017AE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: LPIT 0x000000003F0ED5F0 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000003F0ED688 000161 (v02 INTEL HdaDsp 00000000 INTL 20160422)
ACPI: SSDT 0x000000003F0ED7F0 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x000000003F0EDA90 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: SSDT 0x000000003F0F0A98 000517 (v02 INTEL TbtTypeC 00000000 INTL 20160422)
ACPI: DBGP 0x000000003F0F0FB0 000034 (v01 INTEL 00000002 MSFT 0000005F)
ACPI: DBG2 0x000000003F0F0FE8 000054 (v00 INTEL 00000002 MSFT 0000005F)
ACPI: SSDT 0x000000003F0F1040 000801 (v02 INTEL UsbCTabl 00001000 INTL 20160422)
ACPI: SSDT 0x000000003F0F1848 00CFC3 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
ACPI: NHLT 0x000000003F0FE810 00002D (v00 INTEL EDK2 00000002 01000013)
ACPI: ASF! 0x000000003F0FE840 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: DMAR 0x000000003F0FE8E0 000110 (v01 INTEL KBL 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000004ae7fffff]
NODE_DATA(0) allocated [mem 0x4ae7ea000-0x4ae7fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000004ae7fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x000000002dc79fff]
node 0: [mem 0x0000000048000000-0x0000000048dfffff]
node 0: [mem 0x0000000100000000-0x00000004ae7fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000004ae7fffff]
On node 0 totalpages: 4051478
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 2922 pages used for memmap
DMA32 zone: 187002 pages, LIFO batch:31
Normal zone: 60320 pages used for memmap
Normal zone: 3860480 pages, LIFO batch:31
Reserving Intel graphics memory at 0x000000004b800000-0x000000004f7fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x2dc7a000-0x2dc7afff]
PM: Registered nosave memory: [mem 0x2dc7b000-0x3f0b2fff]
PM: Registered nosave memory: [mem 0x3f0b3000-0x3f0fffff]
PM: Registered nosave memory: [mem 0x3f100000-0x3f7b7fff]
PM: Registered nosave memory: [mem 0x3f7b8000-0x47ffffff]
PM: Registered nosave memory: [mem 0x48e00000-0x4f7fffff]
PM: Registered nosave memory: [mem 0x4f800000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x4f800000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 46 pages/cpu @ffff8e042e400000 s148568 r8192 d31656 u262144
pcpu-alloc: s148568 r8192 d31656 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 3988151
Policy zone: Normal
log_buf_len individual max cpu contribution: 32768 bytes
log_buf_len total cpu_extra contributions: 229376 bytes
log_buf_len min size: 262144 bytes
log_buf_len: 524288 bytes
early log buf free: 249176(95%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 2913320K/16205912K available (10252K kernel code, 1407K rwdata, 3364K rodata, 1948K init, 1348K bss, 361968K reserved, 0K cma-reserved)
Kernel/User page tables isolation: enabled
ftrace: allocating 33231 entries in 130 pages
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 33024, nr_irqs: 2048, preallocated irqs: 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 2000.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3984.00 BogoMIPS (lpj=7968000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170728
ACPI: 11 ACPI AML tables successfully acquired and loaded
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
FEATURE SPEC_CTRL Present
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V2 mitigation: Mitigation: Full generic retpoline
Freeing SMP alternatives memory: 32K
smpboot: Max logical packages: 2
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000003edce000 end: 0x0000003ededfff
DMAR: RMRR base: 0x0000003fb8f000 end: 0x0000003fdd8fff
DMAR: RMRR base: 0x0000004b000000 end: 0x0000004f7fffff
DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0xa)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (31872.00 BogoMIPS)
node 0 initialised, 3232656 pages in 56ms
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x2dc7a000-0x2dc7afff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x3f100000-0x3f7b7fff] (7045120 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 13:32:20, date: 01/25/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
Simple Boot Flag at 0x47 set to 0x80
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI Error: [_SB_.PCI0.RP05.PXSX] Namespace lookup failure, AE_NOT_FOUND (20170728/dswload2-191)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170728/psobject-252)
ACPI Error: Method parse/execution failed \_SB.PCI0.RP04.PXSX, AE_NOT_FOUND (20170728/psparse-550)
ACPI Error: [_SB_.PCI0.RP09.PXSX] Namespace lookup failure, AE_NOT_FOUND (20170728/dswload2-191)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170728/psobject-252)
ACPI Error: Method parse/execution failed \_SB.PCI0.RP08.PXSX, AE_NOT_FOUND (20170728/psparse-550)
ACPI: Executed 49 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E0107D54000 0005CD (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E042E42E400 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E0105FC5240 0000BA (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E042E42F000 000628 (v02 PmRef HwpLvt 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E0105827000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E0107D1A400 000317 (v02 PmRef ApHwp 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E0105A74800 00030A (v02 PmRef ApCst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930
ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 8 GPEs in block 00 to 7F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x4f800000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:5914] type 00 class 0x060000
pci 0000:00:02.0: [8086:5917] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x50000000-0x5fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0xdc420000-0xdc427fff 64bit]
pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdc410000-0xdc41ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdc434000-0xdc434fff 64bit]
pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
pci 0000:00:15.0: reg 0x10: [mem 0xdc433000-0xdc433fff 64bit]
pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
pci 0000:00:15.1: reg 0x10: [mem 0xdc432000-0xdc432fff 64bit]
pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdc431000-0xdc431fff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:9d12] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdc42c000-0xdc42ffff]
pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380
pci 0000:00:1f.3: reg 0x10: [mem 0xdc428000-0xdc42bfff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdc400000-0xdc40ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdc430000-0xdc4300ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:01:00.0: [10ec:525a] type 00 class 0xff0000
pci 0000:01:00.0: reg 0x14: [mem 0xdc300000-0xdc300fff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xdc300000-0xdc3fffff]
pci 0000:02:00.0: [168c:003e] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xdc000000-0xdc1fffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [mem 0xdc000000-0xdc1fffff]
pci 0000:00:1c.4: PCI bridge to [bus 03-6d]
pci 0000:00:1c.4: bridge window [mem 0xac000000-0xda0fffff]
pci 0000:00:1c.4: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
pci 0000:6e:00.0: [144d:a804] type 00 class 0x010802
pci 0000:6e:00.0: reg 0x10: [mem 0xdc200000-0xdc203fff 64bit]
pci 0000:00:1d.0: PCI bridge to [bus 6e]
pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI Error: [^^PCI0.RP05.PXSX.WIST] Namespace lookup failure, AE_NOT_FOUND (20170728/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PEPD._DSM, AE_NOT_FOUND (20170728/psparse-550)
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930
ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x2dc7a000-0x2fffffff]
e820: reserve RAM buffer [mem 0x48e00000-0x4bffffff]
e820: reserve RAM buffer [mem 0x4ae800000-0x4afffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x1800-0x18fe] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs DLL07e6 PNP0f13 (active)
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0xff00-0xfffe] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 03-6d] add_size 1000
pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xdc300000-0xdc3fffff]
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [mem 0xdc000000-0xdc1fffff]
pci 0000:00:1c.4: PCI bridge to [bus 03-6d]
pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.4: bridge window [mem 0xac000000-0xda0fffff]
pci 0000:00:1c.4: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
pci 0000:00:1d.0: PCI bridge to [bus 6e]
pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x4f800000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 1 [mem 0xdc300000-0xdc3fffff]
pci_bus 0000:02: resource 1 [mem 0xdc000000-0xdc1fffff]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xac000000-0xda0fffff]
pci_bus 0000:03: resource 2 [mem 0x60000000-0xa9ffffff 64bit pref]
pci_bus 0000:6e: resource 1 [mem 0xdc200000-0xdc2fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 13244K
DMAR: ACPI device "device:75" under DMAR at fed91000 as 00:15.0
DMAR: ACPI device "device:76" under DMAR at fed91000 as 00:15.1
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x274fa000-0x2b4fa000] (64MB) mapped at [ffff8dffa74fa000-ffff8dffab4f9fff]
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x396d519840e, max_idle_ns: 881590569543 ns
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1516887141.552:1): state=initialized audit_enabled=0 res=1
workingset: timestamp_bits=37 max_order=22 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0x50000000, mapped to 0xffff9b0342000000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x8E
intel_idle: lapic_timer_reliable_states 0xffffffff
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
NET: Registered protocol family 10
Segment Routing with IPv6
RAS: Correctable Errors collector initialized.
microcode: sig=0x806ea, pf=0x80, revision=0x80
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1869559094, 0)->(1873650661, -4091567)
registered taskstats version 1
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 2:703:534
tty ttyS14: hash matches
rtc_cmos 00:01: setting system clock to 2018-01-25 13:32:22 UTC (1516887142)
clocksource: Switched to clocksource tsc
psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4734]
psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1118..]
psmouse serio1: synaptics: Your touchpad (PNP: DLL07e6 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2a1, caps: 0xf00323/0x840300/0x12e800/0x0, board id: 3038, fw id: 2375007
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
Freeing unused kernel memory: 1948K
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 2008K
Freeing unused kernel memory: 732K
systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Listening on Journal Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting dracut ask for additional cmdline parameters...
systemd[1]: Reached target Slices.
systemd[1]: Starting Setup Virtual Console...
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.14.14-1-default xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.14.14-1-default xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usb: port power management may be unreliable
nvme nvme0: pci function 0000:6e:00.0
[drm] Memory usable by graphics device = 4096M
checking generic (50000000 7f0000) vs hw (50000000 10000000)
fb: switching to inteldrmfb from VESA VGA
random: crng init done
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
[drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
fbcon: inteldrmfb (fb0) is primary device
nvme0n1: p1 p2 p3
PM: Starting manual resume from disk
PM: Image not found (code -22)
raid6: sse2x1 gen() 7111 MB/s
usb 1-5: new high-speed USB device number 2 using xhci_hcd
raid6: sse2x1 xor() 9851 MB/s
raid6: sse2x2 gen() 16642 MB/s
usb 1-5: New USB device found, idVendor=0bda, idProduct=58f4
usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-5: Product: Integrated_Webcam_HD
usb 1-5: Manufacturer: CN0FFMHCLOG007BNB10PA00
usb 1-5: SerialNumber: 200901010001
raid6: sse2x2 xor() 11119 MB/s
raid6: sse2x4 gen() 19317 MB/s
usb 1-7: new full-speed USB device number 3 using xhci_hcd
raid6: sse2x4 xor() 11674 MB/s
raid6: avx2x1 gen() 26023 MB/s
raid6: avx2x1 xor() 18875 MB/s
usb 1-7: New USB device found, idVendor=0489, idProduct=e0a2
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
raid6: avx2x2 gen() 32521 MB/s
raid6: avx2x2 xor() 20192 MB/s
raid6: avx2x4 gen() 37476 MB/s
raid6: avx2x4 xor() 20792 MB/s
raid6: using algorithm avx2x4 gen() 37476 MB/s
raid6: .... xor() 20792 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel, assert=on
BTRFS: device fsid beb23321-4aa8-4233-b843-87add7831c6b devid 1 transid 141 /dev/nvme0n1p1
BTRFS info (device nvme0n1p1): disk space caching is enabled
BTRFS info (device nvme0n1p1): has skinny extents
BTRFS info (device nvme0n1p1): enabling ssd optimizations
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
systemd-journald[184]: Received SIGTERM from PID 1 (n/a).
systemd: 20 output lines suppressed due to ratelimiting
BTRFS info (device nvme0n1p1): disk space caching is enabled
[drm] RC6 on
ACPI: AC Adapter [AC] (off-line)
input: Intel HID events as /devices/platform/INT33D5:00/input/input8
intel-hid INT33D5:00: platform supports 5 button array
input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input9
wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
input: PC Speaker as /devices/platform/pcspkr/input/input10
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol Broadcom registered
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
Bluetooth: HCI UART protocol Marvell registered
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
idma64 idma64.0: Found Intel integrated DMA 64-bit
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
dell-wmi 9DBB5994-A997-11DA-B012-B622A1EF5492: Dell descriptor buffer has invalid buffer length (32768)
dell-wmi 9DBB5994-A997-11DA-B012-B622A1EF5492: Detected Dell WMI interface version 1
input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input11
thermal LNXTHERM:00: registered as thermal_zone7
ACPI: Thermal Zone [THM] (25 C)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
ACPI: Battery Slot [BAT0] (battery present)
intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
idma64 idma64.1: Found Intel integrated DMA 64-bit
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
input: DELL07E6:00 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-DELL07E6:00/0018:06CB:76AF.0001/input/input13
hid-multitouch 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL07E6:00 06CB:76AF] on i2c-DELL07E6:00
iTCO_vendor_support: vendor-support=0
Adding 32689472k swap on /dev/nvme0n1p3. Priority:-2 extents:1 across:32689472k SSFS
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3271: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1b
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:02:00.0.bin failed with error -2
ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/cal-pci-0000:02:00.0.bin failed with error -2
ath10k_pci 0000:02:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:143a
ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
ath10k_pci 0000:02:00.0: firmware ver WLAN.RM.4.4.1-00051-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 c3fd4411
ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 0e26ef70
systemd-journald[379]: Received request to flush runtime journal from PID 1
audit: type=1400 audit(1516887146.291:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=704 comm="apparmor_parser"
audit: type=1400 audit(1516887146.303:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="klogd" pid=713 comm="apparmor_parser"
audit: type=1400 audit(1516887146.311:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="syslogd" pid=719 comm="apparmor_parser"
audit: type=1400 audit(1516887146.319:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="syslog-ng" pid=725 comm="apparmor_parser"
Linux video capture interface: v2.00
usbcore: registered new interface driver btusb
uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:58f4)
input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input24
uvcvideo: Unknown video format 00000032-0002-0010-8000-00aa00389b71
uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:58f4)
uvcvideo: Unable to create debugfs 1-2 directory.
input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/input/input25
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
ath10k_pci 0000:02:00.0: Unknown eventid: 118809
ath10k_pci 0000:02:00.0: Unknown eventid: 90118
ath10k_pci 0000:02:00.0: htt-ver 3.44 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
ath: EEPROM regdomain: 0x6c
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6c
ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
ath10k_pci 0000:02:00.0: Unknown eventid: 118809
ath10k_pci 0000:02:00.0: Unknown eventid: 90118
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
ath10k_pci 0000:02:00.0: Unknown eventid: 118809
ath10k_pci 0000:02:00.0: Unknown eventid: 90118
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
NET: Registered protocol family 17
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
fuse init (API version 7.26)
rfkill: input handler disabled
wlp2s0: authenticate with e0:51:63:26:21:3d
wlp2s0: send auth to e0:51:63:26:21:3d (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:21:3d (try 1/3)
wlp2s0: RX AssocResp from e0:51:63:26:21:3d (capab=0x1031 status=0 aid=3)
wlp2s0: associated
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:21:3d
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
wlp2s0: disconnect from AP e0:51:63:26:21:3d for new auth to e0:51:63:26:21:3c
wlp2s0: authenticate with e0:51:63:26:21:3c
wlp2s0: send auth to e0:51:63:26:21:3c (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:21:3c (try 1/3)
wlp2s0: RX ReassocResp from e0:51:63:26:21:3c (capab=0x1431 status=0 aid=3)
wlp2s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:21:3c
wlp2s0: disconnect from AP e0:51:63:26:21:3c for new auth to e0:51:63:26:21:3d
wlp2s0: authenticate with e0:51:63:26:21:3d
wlp2s0: send auth to e0:51:63:26:21:3d (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:21:3d (try 1/3)
wlp2s0: RX ReassocResp from e0:51:63:26:21:3d (capab=0x1031 status=0 aid=3)
wlp2s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:21:3d
BTRFS info (device nvme0n1p1): qgroup scan completed (inconsistency flag cleared)
Unknown pixelformat 0x00000000
------------[ cut here ]------------
WARNING: CPU: 2 PID: 3629 at ../drivers/media/v4l2-core/v4l2-ioctl.c:1288 v4l_enum_fmt+0xcff/0x13b0 [videodev]
Modules linked in: ccm fuse xt_tcpudp ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 cmac xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_raw rfcomm ip6table_security iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack libcrc32c af_packet iptable_mangle iptable_raw iptable_security ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ip_tables x_tables arc4 bnep uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core videodev btusb btrtl snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_soc_skl snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp snd_hda_ext_core ath10k_pci snd_soc_sst_match ath10k_core
snd_soc_core ath mei_wdt snd_compress snd_pcm_dmaengine mac80211 iTCO_wdt iTCO_vendor_support cfg80211 hid_multitouch rtsx_pci_ms memstick intel_rapl snd_hda_intel x86_pkg_temp_thermal intel_powerclamp snd_hda_codec msr coretemp snd_hda_core snd_hwdep kvm_intel snd_pcm kvm snd_timer irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel dell_laptop pcbc snd dell_wmi dell_smbios dcdbas wmi_bmof idma64 aesni_intel aes_x86_64 crypto_simd tpm_tis glue_helper hci_uart ucsi_acpi joydev cryptd btbcm typec_ucsi tpm_tis_core serdev btqca pcspkr processor_thermal_device mei_me i2c_i801 soundcore mei btintel shpchp intel_lpss_pci intel_pch_thermal intel_soc_dts_iosf thermal tpm wmi battery typec bluetooth intel_lpss_acpi ecdh_generic intel_hid rfkill pinctrl_sunrisepoint intel_lpss int3400_thermal pinctrl_intel acpi_thermal_rel int3403_thermal int340x_thermal_zone sparse_keymap ac acpi_pad acpi_als kfifo_buf industrialio btrfs xor zstd_decompress zstd_compress xxhash raid6_pq rtsx_pci_sdmmc mmc_core i915 i2c_algo_bit crc32c_intel nvme drm_kms_helper syscopyarea sysfillrect xhci_pci sysimgblt fb_sys_fops xhci_hcd serio_raw nvme_core rtsx_pci usbcore drm i2c_hid video button sg
CPU: 2 PID: 3629 Comm: cheese Not tainted 4.14.14-1-default #1
Hardware name: Dell Inc. XPS 13 9370/0F6P3V, BIOS 1.0.2 12/06/2017
task: ffff8e034a402080 task.stack: ffff9b0345984000
RIP: 0010:v4l_enum_fmt+0xcff/0x13b0 [videodev]
RSP: 0018:ffff9b0345987cd0 EFLAGS: 00010286
RAX: 000000000000001e RBX: ffff9b0345987dc0 RCX: 0000000000000000
RDX: ffff8e042e49ee00 RSI: ffff8e042e496b18 RDI: ffff8e042e496b18
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000341
R10: ffff8e041b7c4d80 R11: 0000000000000000 R12: ffff8e03a3483600
R13: ffffffffc10dd8e0 R14: ffff8e041b7c4d80 R15: ffff8e03a3483600
FS: 00007f1ec7dcd700(0000) GS:ffff8e042e480000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1ec73ca288 CR3: 00000003ca5c0002 CR4: 00000000003606e0
Call Trace:
__video_do_ioctl+0x332/0x340 [videodev]
? video_usercopy+0x1ef/0x600 [videodev]
video_usercopy+0x177/0x600 [videodev]
? v4l_enum_fmt+0x13b0/0x13b0 [videodev]
? v4l_enum_fmt+0x13b0/0x13b0 [videodev]
v4l2_ioctl+0xb5/0xd0 [videodev]
do_vfs_ioctl+0x90/0x5f0
? mntput_no_expire+0x11/0x1a0
? __fget+0x6a/0xb0
SyS_ioctl+0x74/0x80
entry_SYSCALL_64_fastpath+0x24/0x87
RIP: 0033:0x7f1ee6d5dfd9
RSP: 002b:00007f1ec7dcc458 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f1ec7dcc4c0 RCX: 00007f1ee6d5dfd9
RDX: 00007f1ec7dcc4c0 RSI: 00000000c0405602 RDI: 0000000000000014
RBP: 0000000000000000 R08: 0000000000000000 R09: 00007f1ec7dcc610
R10: 00007f1ec0006a60 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f1ec7dcc490 R14: 00007f1ec7dcc490 R15: 00007f1ec0006a60
Code: 3d 4f 35 31 31 0f 84 bf 05 00 00 3d 4d 54 32 31 48 c7 c6 59 a7 ec c0 0f 84 e5 f5 ff ff 89 c6 48 c7 c7 77 b3 ec c0 e8 4c 51 22 dd ff 80 7b 0c 00 0f 85 73 f3 ff ff 8b 43 2c 48 c7 c1 1e a7 ec
---[ end trace 8992818302152f14 ]---
Unknown pixelformat 0x00000000
------------[ cut here ]------------
WARNING: CPU: 2 PID: 3629 at ../drivers/media/v4l2-core/v4l2-ioctl.c:1288 v4l_enum_fmt+0xcff/0x13b0 [videodev]
Modules linked in: ccm fuse xt_tcpudp ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 cmac xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_raw rfcomm ip6table_security iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack libcrc32c af_packet iptable_mangle iptable_raw iptable_security ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ip_tables x_tables arc4 bnep uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core videodev btusb btrtl snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_soc_skl snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp snd_hda_ext_core ath10k_pci snd_soc_sst_match ath10k_core
snd_soc_core ath mei_wdt snd_compress snd_pcm_dmaengine mac80211 iTCO_wdt iTCO_vendor_support cfg80211 hid_multitouch rtsx_pci_ms memstick intel_rapl snd_hda_intel x86_pkg_temp_thermal intel_powerclamp snd_hda_codec msr coretemp snd_hda_core snd_hwdep kvm_intel snd_pcm kvm snd_timer irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel dell_laptop pcbc snd dell_wmi dell_smbios dcdbas wmi_bmof idma64 aesni_intel aes_x86_64 crypto_simd tpm_tis glue_helper hci_uart ucsi_acpi joydev cryptd btbcm typec_ucsi tpm_tis_core serdev btqca pcspkr processor_thermal_device mei_me i2c_i801 soundcore mei btintel shpchp intel_lpss_pci intel_pch_thermal intel_soc_dts_iosf thermal tpm wmi battery typec bluetooth intel_lpss_acpi ecdh_generic intel_hid rfkill pinctrl_sunrisepoint intel_lpss int3400_thermal pinctrl_intel acpi_thermal_rel int3403_thermal int340x_thermal_zone sparse_keymap ac acpi_pad acpi_als kfifo_buf industrialio btrfs xor zstd_decompress zstd_compress xxhash raid6_pq rtsx_pci_sdmmc mmc_core i915 i2c_algo_bit crc32c_intel nvme drm_kms_helper syscopyarea sysfillrect xhci_pci sysimgblt fb_sys_fops xhci_hcd serio_raw nvme_core rtsx_pci usbcore drm i2c_hid video button sg
CPU: 2 PID: 3629 Comm: cheese Tainted: G W 4.14.14-1-default #1
Hardware name: Dell Inc. XPS 13 9370/0F6P3V, BIOS 1.0.2 12/06/2017
task: ffff8e034a402080 task.stack: ffff9b0345984000
RIP: 0010:v4l_enum_fmt+0xcff/0x13b0 [videodev]
RSP: 0018:ffff9b0345987cd0 EFLAGS: 00010286
RAX: 000000000000001e RBX: ffff9b0345987dc0 RCX: 0000000000000006
RDX: 0000000000000007 RSI: 0000000000000082 RDI: ffff8e042e496b10
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000369
R10: ffff8e041b7c4d80 R11: 0000000000000000 R12: ffff8e03a3483600
R13: ffffffffc10dd8e0 R14: ffff8e041b7c4d80 R15: ffff8e03a3483600
FS: 00007f1ec7dcd700(0000) GS:ffff8e042e480000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1ec00196d8 CR3: 00000003ca5c0002 CR4: 00000000003606e0
Call Trace:
__video_do_ioctl+0x332/0x340 [videodev]
video_usercopy+0x177/0x600 [videodev]
? v4l_enum_fmt+0x13b0/0x13b0 [videodev]
? v4l_enum_fmt+0x13b0/0x13b0 [videodev]
v4l2_ioctl+0xb5/0xd0 [videodev]
do_vfs_ioctl+0x90/0x5f0
? mntput_no_expire+0x11/0x1a0
? __fget+0x6a/0xb0
SyS_ioctl+0x74/0x80
entry_SYSCALL_64_fastpath+0x24/0x87
RIP: 0033:0x7f1ee6d5dfd9
RSP: 002b:00007f1ec7dcc458 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1ee6d5dfd9
RDX: 00007f1ec0015db0 RSI: 00000000c0405602 RDI: 0000000000000014
RBP: 00007f1ec0015db0 R08: 0000000000000003 R09: 00000000c0405602
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000c0405602
R13: 00000000c0405602 R14: 00007f1ec7dcd680 R15: 0000000000000014
Code: 3d 4f 35 31 31 0f 84 bf 05 00 00 3d 4d 54 32 31 48 c7 c6 59 a7 ec c0 0f 84 e5 f5 ff ff 89 c6 48 c7 c7 77 b3 ec c0 e8 4c 51 22 dd ff 80 7b 0c 00 0f 85 73 f3 ff ff 8b 43 2c 48 c7 c1 1e a7 ec
---[ end trace 8992818302152f15 ]---
wlp2s0: disconnect from AP e0:51:63:26:21:3d for new auth to e0:51:63:26:21:3c
wlp2s0: authenticate with e0:51:63:26:21:3c
wlp2s0: send auth to e0:51:63:26:21:3c (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:21:3c (try 1/3)
wlp2s0: RX ReassocResp from e0:51:63:26:21:3c (capab=0x1431 status=0 aid=3)
wlp2s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:21:3c
wlp2s0: deauthenticating from e0:51:63:26:21:3c by local choice (Reason: 3=DEAUTH_LEAVING)
ath10k_pci 0000:02:00.0: Unknown eventid: 118809
ath10k_pci 0000:02:00.0: Unknown eventid: 90118
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with e0:51:63:26:21:3c
wlp2s0: send auth to e0:51:63:26:21:3c (try 1/3)
wlp2s0: send auth to e0:51:63:26:21:3c (try 2/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:21:3c (try 1/3)
wlp2s0: RX AssocResp from e0:51:63:26:21:3c (capab=0x1431 status=0 aid=3)
wlp2s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:21:3c
wlp2s0: disconnect from AP e0:51:63:26:21:3c for new auth to e0:51:63:26:21:3d
wlp2s0: authenticate with e0:51:63:26:21:3d
wlp2s0: send auth to e0:51:63:26:21:3d (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:21:3d (try 1/3)
wlp2s0: RX ReassocResp from e0:51:63:26:21:3d (capab=0x1031 status=0 aid=2)
wlp2s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:21:3d
wlp2s0: disconnect from AP e0:51:63:26:21:3d for new auth to e0:51:63:26:21:3c
wlp2s0: authenticate with e0:51:63:26:21:3c
wlp2s0: send auth to e0:51:63:26:21:3c (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:21:3c (try 1/3)
wlp2s0: RX ReassocResp from e0:51:63:26:21:3c (capab=0x1431 status=0 aid=3)
wlp2s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:21:3c
wlp2s0: disconnect from AP e0:51:63:26:21:3c for new auth to e0:51:63:26:21:3d
wlp2s0: authenticate with e0:51:63:26:21:3d
wlp2s0: send auth to e0:51:63:26:21:3d (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:21:3d (try 1/3)
wlp2s0: RX ReassocResp from e0:51:63:26:21:3d (capab=0x1031 status=0 aid=2)
wlp2s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:21:3d
wlp2s0: deauthenticating from e0:51:63:26:21:3d by local choice (Reason: 3=DEAUTH_LEAVING)
ath10k_pci 0000:02:00.0: Unknown eventid: 118809
ath10k_pci 0000:02:00.0: Unknown eventid: 90118
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with e0:51:63:26:21:3c
wlp2s0: send auth to e0:51:63:26:21:3c (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:21:3c (try 1/3)
wlp2s0: RX AssocResp from e0:51:63:26:21:3c (capab=0x1431 status=0 aid=3)
wlp2s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:21:3c
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
wlp2s0: disconnect from AP e0:51:63:26:21:3c for new auth to e0:51:63:26:21:3d
wlp2s0: authenticate with e0:51:63:26:21:3d
wlp2s0: send auth to e0:51:63:26:21:3d (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:21:3d (try 1/3)
wlp2s0: RX ReassocResp from e0:51:63:26:21:3d (capab=0x1031 status=0 aid=3)
wlp2s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:21:3d
wlp2s0: disconnect from AP e0:51:63:26:21:3d for new auth to e0:51:63:26:21:3c
wlp2s0: authenticate with e0:51:63:26:21:3c
wlp2s0: send auth to e0:51:63:26:21:3c (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:21:3c (try 1/3)
wlp2s0: RX ReassocResp from e0:51:63:26:21:3c (capab=0x1431 status=0 aid=3)
wlp2s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:21:3c
wlp2s0: disconnect from AP e0:51:63:26:21:3c for new auth to e0:51:63:26:21:3d
wlp2s0: authenticate with e0:51:63:26:21:3d
wlp2s0: send auth to e0:51:63:26:21:3d (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:21:3d (try 1/3)
wlp2s0: RX ReassocResp from e0:51:63:26:21:3d (capab=0x1031 status=0 aid=2)
wlp2s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:21:3d
wlp2s0: disconnect from AP e0:51:63:26:21:3d for new auth to e0:51:63:26:21:3c
wlp2s0: authenticate with e0:51:63:26:21:3c
wlp2s0: send auth to e0:51:63:26:21:3c (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:21:3c (try 1/3)
wlp2s0: RX ReassocResp from e0:51:63:26:21:3c (capab=0x1431 status=0 aid=3)
wlp2s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:21:3c
wlp2s0: disconnect from AP e0:51:63:26:21:3c for new auth to e0:51:63:26:21:3d
wlp2s0: authenticate with e0:51:63:26:21:3d
wlp2s0: send auth to e0:51:63:26:21:3d (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:21:3d (try 1/3)
wlp2s0: RX ReassocResp from e0:51:63:26:21:3d (capab=0x1031 status=0 aid=2)
wlp2s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:21:3d
wlp2s0: disconnect from AP e0:51:63:26:21:3d for new auth to e0:51:63:26:21:3c
wlp2s0: authenticate with e0:51:63:26:21:3c
wlp2s0: send auth to e0:51:63:26:21:3c (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:21:3c (try 1/3)
wlp2s0: RX ReassocResp from e0:51:63:26:21:3c (capab=0x1431 status=0 aid=3)
wlp2s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:21:3c
wlp2s0: disconnect from AP e0:51:63:26:21:3c for new auth to e0:51:63:26:21:3d
wlp2s0: authenticate with e0:51:63:26:21:3d
wlp2s0: send auth to e0:51:63:26:21:3d (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:21:3d (try 1/3)
wlp2s0: RX ReassocResp from e0:51:63:26:21:3d (capab=0x1031 status=0 aid=2)
wlp2s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:21:3d
wlp2s0: disconnect from AP e0:51:63:26:21:3d for new auth to e0:51:63:26:21:3c
wlp2s0: authenticate with e0:51:63:26:21:3c
wlp2s0: send auth to e0:51:63:26:21:3c (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:21:3c (try 1/3)
wlp2s0: RX ReassocResp from e0:51:63:26:21:3c (capab=0x1431 status=0 aid=3)
wlp2s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:21:3c
wlp2s0: disconnect from AP e0:51:63:26:21:3c for new auth to e0:51:63:26:21:3d
wlp2s0: authenticate with e0:51:63:26:21:3d
wlp2s0: send auth to e0:51:63:26:21:3d (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:21:3d (try 1/3)
wlp2s0: RX ReassocResp from e0:51:63:26:21:3d (capab=0x1031 status=0 aid=2)
wlp2s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:21:3d
wlp2s0: deauthenticating from e0:51:63:26:21:3d by local choice (Reason: 3=DEAUTH_LEAVING)
ath10k_pci 0000:02:00.0: Unknown eventid: 118809
ath10k_pci 0000:02:00.0: Unknown eventid: 90118
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with e0:51:63:26:21:3d
wlp2s0: send auth to e0:51:63:26:21:3d (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:21:3d (try 1/3)
wlp2s0: RX AssocResp from e0:51:63:26:21:3d (capab=0x1031 status=0 aid=2)
wlp2s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:21:3d
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
wlp2s0: deauthenticating from e0:51:63:26:21:3d by local choice (Reason: 3=DEAUTH_LEAVING)
ath10k_pci 0000:02:00.0: Unknown eventid: 118809
ath10k_pci 0000:02:00.0: Unknown eventid: 90118
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with e0:51:63:26:21:3d
wlp2s0: send auth to e0:51:63:26:21:3d (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:21:3d (try 1/3)
wlp2s0: RX AssocResp from e0:51:63:26:21:3d (capab=0x1031 status=0 aid=2)
wlp2s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:21:3d
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
wlp2s0: deauthenticating from e0:51:63:26:21:3d by local choice (Reason: 3=DEAUTH_LEAVING)
ath10k_pci 0000:02:00.0: Unknown eventid: 118809
ath10k_pci 0000:02:00.0: Unknown eventid: 90118
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with e0:51:63:26:21:3c
wlp2s0: send auth to e0:51:63:26:21:3c (try 1/3)
wlp2s0: send auth to e0:51:63:26:21:3c (try 2/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:21:3c (try 1/3)
wlp2s0: RX AssocResp from e0:51:63:26:21:3c (capab=0x1431 status=0 aid=3)
wlp2s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:21:3c
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
wlp2s0: disconnect from AP e0:51:63:26:21:3c for new auth to e0:51:63:26:21:3d
wlp2s0: authenticate with e0:51:63:26:21:3d
wlp2s0: send auth to e0:51:63:26:21:3d (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:21:3d (try 1/3)
wlp2s0: RX ReassocResp from e0:51:63:26:21:3d (capab=0x1031 status=0 aid=2)
wlp2s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:21:3d
wlp2s0: disconnect from AP e0:51:63:26:21:3d for new auth to e0:51:63:26:21:3c
wlp2s0: authenticate with e0:51:63:26:21:3c
wlp2s0: send auth to e0:51:63:26:21:3c (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:21:3c (try 1/3)
wlp2s0: RX ReassocResp from e0:51:63:26:21:3c (capab=0x1431 status=0 aid=3)
wlp2s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:21:3c
wlp2s0: disconnect from AP e0:51:63:26:21:3c for new auth to e0:51:63:26:30:a5
wlp2s0: authenticate with e0:51:63:26:30:a5
wlp2s0: send auth to e0:51:63:26:30:a5 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:30:a5 (try 1/3)
wlp2s0: RX ReassocResp from e0:51:63:26:30:a5 (capab=0x1031 status=0 aid=2)
wlp2s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:30:a5
acpi INT3400:00: Unsupported event [0x86]
CPU4: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU6: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU5: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU4: Package temperature/speed normal
acpi INT3400:00: Unsupported event [0x86]
wlp2s0: authenticate with e0:51:63:26:1c:fd
wlp2s0: send auth to e0:51:63:26:1c:fd (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:1c:fd (try 1/3)
wlp2s0: RX AssocResp from e0:51:63:26:1c:fd (capab=0x1031 status=0 aid=1)
wlp2s0: associated
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:1c:fd
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
------------[ cut here ]------------
WARNING: CPU: 5 PID: 0 at ../net/core/dev.c:5547 net_rx_action+0x2c0/0x390
Modules linked in: ccm fuse xt_tcpudp ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 cmac xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_raw rfcomm ip6table_security iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack libcrc32c af_packet iptable_mangle iptable_raw iptable_security ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ip_tables x_tables arc4 bnep uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core videodev btusb btrtl snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_soc_skl snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp snd_hda_ext_core ath10k_pci snd_soc_sst_match ath10k_core
snd_soc_core ath mei_wdt snd_compress snd_pcm_dmaengine mac80211 iTCO_wdt iTCO_vendor_support cfg80211 hid_multitouch rtsx_pci_ms memstick intel_rapl snd_hda_intel x86_pkg_temp_thermal intel_powerclamp snd_hda_codec msr coretemp snd_hda_core snd_hwdep kvm_intel snd_pcm kvm snd_timer irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel dell_laptop pcbc snd dell_wmi dell_smbios dcdbas wmi_bmof idma64 aesni_intel aes_x86_64 crypto_simd tpm_tis glue_helper hci_uart ucsi_acpi joydev cryptd btbcm typec_ucsi tpm_tis_core serdev btqca pcspkr processor_thermal_device mei_me i2c_i801 soundcore mei btintel shpchp intel_lpss_pci intel_pch_thermal intel_soc_dts_iosf thermal tpm wmi battery typec bluetooth intel_lpss_acpi ecdh_generic intel_hid rfkill pinctrl_sunrisepoint intel_lpss int3400_thermal pinctrl_intel acpi_thermal_rel int3403_thermal int340x_thermal_zone sparse_keymap ac acpi_pad acpi_als kfifo_buf industrialio btrfs xor zstd_decompress zstd_compress xxhash raid6_pq rtsx_pci_sdmmc mmc_core i915 i2c_algo_bit crc32c_intel nvme drm_kms_helper syscopyarea sysfillrect xhci_pci sysimgblt fb_sys_fops xhci_hcd serio_raw nvme_core rtsx_pci usbcore drm i2c_hid video button sg
CPU: 5 PID: 0 Comm: swapper/5 Tainted: G W 4.14.14-1-default #1
Hardware name: Dell Inc. XPS 13 9370/0F6P3V, BIOS 1.0.2 12/06/2017
task: ffff8e010636c040 task.stack: ffff9b034196c000
RIP: 0010:net_rx_action+0x2c0/0x390
RSP: 0018:ffff8e042e543ef0 EFLAGS: 00010293
RAX: 000000000000004c RBX: 0000000000000040 RCX: ffff8e041c6e1e68
RDX: ffff8dffabc26000 RSI: 00000000fffffe00 RDI: ffffffffc1050eaf
RBP: ffff8e041c6e7a60 R08: 0000000000000002 R09: 0000000000000000
R10: 000000000000359e R11: 0000000000000001 R12: 00000000000000e0
R13: 0000000000000000 R14: 00000000ffffffff R15: 000000000000004c
FS: 0000000000000000(0000) GS:ffff8e042e540000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000556a8b7b3000 CR3: 00000001ce00a004 CR4: 00000000003606e0
Call Trace:
__do_softirq+0xde/0x2e5
irq_exit+0xae/0xb0
do_IRQ+0x81/0xd0
common_interrupt+0x17f/0x17f
RIP: 0010:cpuidle_enter_state+0xa2/0x310
RSP: 0018:ffff9b034196fec0 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff87
RAX: ffff8e042e5630c0 RBX: 000012f2a4ae3079 RCX: 000000000000001f
RDX: 000012f2a4ae3079 RSI: fffffffb8d91b597 RDI: 0000000000000000
RBP: ffffbb033fd4d260 R08: 00000000000002d8 R09: 00000000000003c7
R10: ffff9b034196fea0 R11: 0000000000000145 R12: 0000000000000006
R13: ffffffff9f0d6a98 R14: 0000000000000000 R15: 000012f2a4ab3f82
do_idle+0x181/0x1e0
cpu_startup_entry+0x5f/0x70
start_secondary+0x1a0/0x1e0
secondary_startup_64+0xa5/0xb0
Code: 39 00 4d 8b 14 24 4d 85 d2 75 e1 44 8b 64 24 14 65 ff 0d 14 20 9b 61 0f 85 92 fe ff ff e8 e0 f1 99 ff 44 39 fb 0f 8d 8d fe ff ff ff 44 39 fb 0f 8f 8b fe ff ff 48 8b 45 10 a8 04 75 71 48 83
---[ end trace 8992818302152f16 ]---
wlp2s0: deauthenticating from e0:51:63:26:1c:fd by local choice (Reason: 3=DEAUTH_LEAVING)
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
PM: suspend entry (s2idle)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.023 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
psmouse serio1: Failed to disable mouse on isa0060/serio1
ACPI: button: The lid device is not compliant to SW_LID.
OOM killer enabled.
Restarting tasks ...
[drm] RC6 on
done.
PM: suspend exit
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
ath10k_pci 0000:02:00.0: Unknown eventid: 118809
ath10k_pci 0000:02:00.0: Unknown eventid: 90118
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with e0:51:63:26:1c:fd
wlp2s0: send auth to e0:51:63:26:1c:fd (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:1c:fd (try 1/3)
wlp2s0: RX AssocResp from e0:51:63:26:1c:fd (capab=0x1031 status=0 aid=1)
wlp2s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:1c:fd
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
wlp2s0: deauthenticating from e0:51:63:26:1c:fd by local choice (Reason: 3=DEAUTH_LEAVING)
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
PM: suspend entry (s2idle)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.003 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
OOM killer enabled.
Restarting tasks ...
[drm] RC6 on
done.
PM: suspend exit
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
ath10k_pci 0000:02:00.0: Unknown eventid: 118809
ath10k_pci 0000:02:00.0: Unknown eventid: 90118
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
ath10k_pci 0000:02:00.0: Unknown eventid: 118809
ath10k_pci 0000:02:00.0: Unknown eventid: 90118
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with e0:51:63:26:1c:fd
wlp2s0: send auth to e0:51:63:26:1c:fd (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:1c:fd (try 1/3)
wlp2s0: RX AssocResp from e0:51:63:26:1c:fd (capab=0x1031 status=0 aid=3)
wlp2s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country IE
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:1c:fd
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
acpi INT3400:00: Unsupported event [0x86]
CPU0: Core temperature above threshold, cpu clock throttled (total events = 107)
CPU4: Core temperature above threshold, cpu clock throttled (total events = 107)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 108)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 108)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 108)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 108)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 108)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 108)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 108)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 108)
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU5: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU6: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU4: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Core temperature above threshold, cpu clock throttled (total events = 503)
CPU4: Core temperature above threshold, cpu clock throttled (total events = 503)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 531)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 531)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 531)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 531)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 531)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 531)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 531)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 531)
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU6: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU5: Package temperature/speed normal
CPU4: Package temperature/speed normal
CPU0: Package temperature/speed normal